Z-Wave 800 Series Smart Switch Installation Basics
easy
10 Questions
Question 1 of 10
What is the primary function of a Z-Wave 800 series smart switch?
A Z-Wave smart switch replaces a standard wall switch to allow for remote, app, or voice control of electrical loads.
Question 2 of 10
What type of connection is required in the wall box for these specific Z-Wave devices?
The article explicitly states that a neutral wire must be available in the wall box for the proper operation of these Z-Wave smart devices.
Question 3 of 10
What is the maximum current rating for the Z-Wave 800 series switch mentioned?
The smart switch is rated for 15A at 120V AC for general loads.
Question 4 of 10
What is the primary communication protocol used by these smart switches?
The device uses the Z-Wave wireless mesh network protocol.
Question 5 of 10
What is the purpose of a 'traveler' wire in this installation?
The traveler terminal (T) is used specifically for 3-way switching applications where multiple switches control one load.
Question 6 of 10
What frequency range does the Z-Wave protocol typically operate in?
Z-Wave is a wireless mesh network protocol designed at 900MHz.
Question 7 of 10
How can a Z-Wave switch help the network besides controlling a load?
These switches can act as repeaters to extend and strengthen the Z-Wave mesh network.
Question 8 of 10
What is the recommended installation distance from the hub or a repeater for reliable operation?
The article suggests installing the device within 50 ft (15 m) of the hub or another repeater for reliable operation.
Question 9 of 10
Which of the following can a Z-Wave smart switch control according to the article?
The ratings allow it to control lighting, ceiling fans, exhaust fans, pumps, and other residential loads.
Question 10 of 10
What is a 'companion device' used for in Z-Wave systems?
Companion devices are used to control the switch operation from another location, typically in multi-location (3-way) setups.
1 / 10